HP 3000 PRO concrete block making machine

It is the smallest machine from the our series of stationary concrete block making machines, with attractive purchase price and operation cost, and ease of handling.

ADVANTAGES OF THE CONCRETE BLOCK MAKING MACHINE:

The HP 3000 smallest machine from the our series of stationary concrete block making machines, with attractive purchase price and operation cost, and ease of handling. It is reliable and durable due to the application of proven design solutions.

The HP 3000 PRO concrete block making machine is intended for stationary production. It is equipped with a vibration table, and adjusted to operate with typical devices of production plants.

The standard version is designed for production of single layer products. It can be additionally equipped with a unit for feeding face concrete, thanks to which double-layer products can be manufactured.

Moreover, it is equipped with proven solutions, such as:
• Hydraulic drives for feeding boxes and running gear
• Mechanical mounting of mold and tamper head
• Linear bearings
• Mold and stamp elements mating precisely

 

DESIGN SOLUTIONS

Drive of the feeding boxes –Direct drive transmission of the feeding box by hydraulic actuators and a lever mechanism previously used have been replaced with a solution that transfers the drive directly from the hydraulic motors through gears to box bars. This change results in the reduction of the dimensions of this machine part, thus less energy is required to move the feeding boxes. The application of gears improved the dynamics of the box operation. Plastic wheels greatly reduce noise and protect other, more important and expensive elements of the system from damaging, reducing at the same time their wear.
Linear bearings – The solution applied for accurate guiding and positioning of the mold and stamp elements mating reduces mold wear. This way, the lifetime of mold liner cavities and tamper shoes is extended.
Mechanical tamper head and mold mounting – Application of simple threaded connections results in structure simplification.
Frame raising – Using the toothed jack allows for the simplification of the drive unit structure and limits the operator’s work.

 

DTECHNICAL DATA

SCOPE OF AUTOMATIONFULLY AUTOMATIC MOLDING PROCESS
MAXIMUM PRODUCT HEIGHT
300 mm
MINIMUM PRODUCT HEIGHT
40 mm
PRODUCT STRUCTURE
wsingle or double layer product
SIZE OF PRODUCTION BOARDS
1400 x 1100 mm
THICKNESS OF PRODUCTION BOARDS
12 to 55 mm (stationary system)
INSTALLED POWER
approx. 71 kW
MAXIMUM FORCE OF VIBRATION IMPACT STROKE
(STEPLESSLY ADJUSTABLE)
180 kN
MAXIMUM TAMPER HEAD PRESSURE
150 kN
MAXIMUM OUTPUT
(NUMBER OF PRODUCTION CYCLES PER HOUR)
approx. 180 cycles for double layer paver
approx. 95 cycles for 600 mm palisade
OVERALL DIMENSIONS OF MECHANICAL STRUCTURE
2500 x 5600 x 4670 mm
WEIGHT OF THE COMPLETE MACHINE
approx. 16 000 kg
PRODUCT TYPEPAVER, SLABS, CURBSTONES, GARDEN CURBS, BORDER,

CONSTRUCTION ELEMENTS AND FENCINGS